These casings are designed to cut and seal the pipes for various purposes with limited space inlet section. They are made of rubber or rubber-cord material. Rubber used in the surface layer of the shell - gastight.
Pneumatic plugs for gas industry and housing production of "SIE "Sibrezinotehnika" can be used for shutoff and full sealing of the pipeline during repair works, test with the testing and inspection of pipelines at a maximum pressure and the presence of defects (cracks, tears, etc.). In coordination with the consumer production of other standard sizes is possible.
The design and manufacturing technology of the plugs are patented.
Pneumatic plugs are available by TU 2527-008-23770232-2012.
Design of plugs
The shape and flexibility of membranes helps to perform the installation through a small hole in the side tube. From one end of the tip of the conical shell is installed or spherical in shape, with another - quick connection to supply air pressure. Tip of material and quick coupling eliminates the spark that allows the use of a skin in the pipes of flammable liquids or gases. One of the variants provides (at customer's request) installation inside the shell plastic tube, which is a flexible member and makes it easier installation and removal of shell through the side opening.
Characteristics of plugs
Overlap diameter — from 50 to 500 mm
Working pressure in the plug — from 2.5 to 4 ATM
The maximum allowable pressure in the pipe — from 0.8 to 1.5 ATM
Test pressure — from 3.1 to 5 ATM
Water temperature — from 0° to 90° C
Plugs can be made of oil-resistant rubber, capable of working not only in water but also in petroleum products such as gasoline, kerosene, diesel fuel, etc.
Housing, Industry, Oil and Gas industry
Installing through pre-formed side hole. Installing through side arm.
Installation at an angle of 90º. When installing through drainage pipe at an angle of 90º a guide device is used which determines the direction of the pipe shell in position.
Installation through the transition.
Delivery of production is carried out to any point of Russia, the near and far abroad, the following transport companies: "zheldorekspeditsiya", "Autotrading", "Sherl TK", "RATEK", "Energy", "Business Lines".
Shipment of production is made after receipt of an advance payment in the following terms:
If customs clearance is necessary, the shipment period is increased by 2-3 working days.